Two Face Turning Lathe for valve

Introduction:

The power head is equipped with three - stage manual speed change with powerful motor,achieve low speed but high torque, can withstand heavy cutting load, improve processing efficiency.


Product Detail

Product Tags

Two -Head CNC Machine For Industrial Valve

Two-head CNC Machine Tool

Machine structure

This machine tool is a horizontal CNC Two-sided milling machine. The two side heads are respectively composed of a horizontal CNC movable sliding table and a CNC boring head. The middle is composed of a workbench, hydraulic fixtures, etc., and is equipped with independent electrical cabinets, hydraulic stations, and centralized lubrication. Device, full protection, water cooling, automatic chip removal device using chip conveyor. The workpiece is manually lifted and clamped hydraulically.

Workpiece processing standard process:

A-The machine tool is one-time positioning processing, one piece at a time, requiring the previous process to process a datum surface as the installation and positioning datum.

B-The standard process is: clean the work piece--put the work piece into the tooling--hydraulically clamp the work piece, the two sets of spindle work slides are fast forward and tapped, and the two sets can be processed simultaneously or step by step. The two sets of slides are processed. Rewind quickly to the original position--hydraulic release--manual loading and unloading--enter the next cycle. See the mechanism schematic diagram for details.

图片1Hydraulic pressure equipment
The hydraulic station adopts the independent Superposition valve, which is composed of a high quality electromagnetic valve, a pressure regulating valve, a throttle valve and a double vane pump. And equipped with air cooling device to ensure that the hydraulic station has normal oil temperature when it works.

图片1

Electrical cabinet
The Electrical cabinet is independent and closed.Installed with CNC controller, Inverter and electrical components.Also set air cooling device to ensure that the electrical components of the machine work properly, no dust.

图片2

Centralized lubrication device

The Lubrication system equipped with Nanjing Beiqier progressive lubrication device,pump the lubricating oil into the moving parts regularly. Avoid tedious manual operation, improve the service life of machine tools.
Cooling chip remove device

This machine adopts heavy flow cooling, The iron chips are washed by the cooling water to flow into the chip removing device through the chip removing mouth of machine body.Chips are saved into one box to ensure the cleanliness of the machine tool and reduce the labor intensity
Huadian PLC controller

This product is a high-quality CNC device with all digital bus.It keeps abreast with overseas high-grade  PLC Controller. The operation is simple and convenient, one key operation, no complicated numerical control operation, the maximum increase efficiency, reduce production cost.

图片3

 

 

 

 

Specification

Machining range

Power head dia.(mm)

φ400

Max.Machining Length(mm)

Φ600

Max.Machining Dia.(mm)

Φ460

Spindle

Spindle Center Hight(mm)

Φ385

Motor power(kw)

5.5kw

Spindle speed-Gear stepless (r/min)

110/140/190

Feed

Rapid Moving

(mm/min)

X-axis

3000

Y-axis

3000

Travel

X-axis/Y-axis(mm)

150/350

CNC Controller

GSK

980-TB3

Others

Power

AC 380V/50Hz

lubrication

Electronic lubrication

Fixture

Hydraulic clamping

Weight(kg)

3400

Dimension(mm)

3400x2000x1800


  • Previous:
  • Next:

  • Send your message to us:

    Write your message here and send it to us