Three Side Drilling Machine

Introduction:

This machine worked with PLC Controller, it can work for many procedures,for example, End face hole , Median orifice, Bore-hole and Sphere.


Product Detail

Product Tags

Main features

(1)This machine worked with PLC Controller, it can work for many procedures,for example, End face hole , Median orifice, Bore-hole and Sphere. It’s CNC Controller has good compatibility, powerful function and easy operation.
(2)The Feed Sliding table guideway use high quality gray cast iron,trough rough casting, tempering and aging treatment by three times. Fully eliminate the residual internal stress, The surface of the guide way adopts super audio quenching and the hardness is up to HRC55. Through high precision guide way grinding processing, to ensure the accuracy, rigidity, stability.
(3)The transmission part adopts precision ball screw and interpolation to eliminate the gap,to ensure the machine drive steady.
(4)The power head is equipped with three - stage manual speed change with powerful motor,achieve low speed but high torque, can withstand heavy cutting load, improve processing efficiency.
(5)The working equipment adopts Hydraulic pressure-automatic clamping, to improve efficiency and reduce labor intensity.
(6)The machine adopts Centralized lubrication, to ensure that the full lubrication of each moving parts then improve the service life of machine tools.

This machine is mainly used in processing Valve, Pump body, Auto parts, Construction machinery parts etc.It can work for many procedures,for example, End face hole , Median orifice, Bore-hole and Sphere.It worked with Huadian PLC Controller, It can realize automation, high precision, multi variety and mass production.

Specification

Model HD-Z300BY
Power Supply(Voltage / frequency) 380V/50HZ
Max.Axis Travel(mm) 380
Drill pipe speed(r/min) 270  360
Drill pipe installation(National standard) Mohs NO.2
Suitable Drill (mm) 8-23
Drilling hole distance error (mm) 0.1
Machining hole diameter(mm) 60-295
Min. center distance suitable for working hole(mm) 36
Tooling form Hydraulic clamping
 Feed form Hydraulic feed
Drilling motor power 3×5.5KW
Feed speed Stepless speed regulation

  • Previous:
  • Next:

  • Write your message here and send it to us