Turning Drilling And Tapping Combined Machine

Introduction:

This machine is a multi-station turning, drilling and tapping combined machine . The left and right sides are composed of a boring turning head and a numerical control moving slide table, the feed is controlled by a numerical cont


Product Detail

Product Tags

Machine Features

This machine is a multi-station turning, drilling and tapping combined machine . The left and right sides are composed of a boring turning head and a numerical control moving slide table, the feed is controlled by a numerical control system; the third side is composed of 1 boring turning head, 2 drilling heads, 1 flange drilling head, and 1 tapping head; The 5 heads on the third side can move horizontally with the CNC sliding table to exchange stations, and also can be fed separately for processing; the middle is composed of a hydraulic rotary table, a hydraulic fixture and other parts. It is also equipped with an independent electrical cabinet, hydraulic station, centralized lubrication device, full protection, water cooling system, automatic chip removal device and other components. The workpiece is manually loaded & unloaded and clamped hydraulically.

Specification

Power supply

380AC

Boring head Main motor power

5.5Kw

Feed motor

15N·m servo motor

Boring head Spindle speed range (r/min)

110/143/194 Spindle stepless speed regulation

Distance from spindle center to bed

385mm (specifically set according to the workpiece)

Taper hole at the end of the spindle

1:20

Drilling head main motor power

2.2Kw

Feed motor

15N·m servo motor

Taper hole at the spindle end

BT40

Porous drill bit Main motor power

2.2Kw

Feed motor

15N·m servo motor

Taper hole at the spindle end

BT40 (with multi-axis device)

Tapping head main motor power

3Kw

Feed motor

15N·m servo motor

Control system

Huadian CNC system

Protection form

Full protection

Maximum machining workpiece length

200mm

Maximum machining diameter

200mm

Flat rotating plate diameter

φ300mm (set according to the required tool travel

Z axis travel

350mm

X axis travel

110mm

Rapid traverse feed (mm/min)

X direction 3000 Z direction 3000

Repeat positioning accuracy

X direction 0.01 Z direction 0.015

Tooling form

hydraulic clamping

Lubrication method

Centralized lubrication by electronic lubrication pump


  • Previous:
  • Next:

  • Write your message here and send it to us