Center Drive lathe For Supporting Roller

Introduction:

Double-end CNC lathe The double-end CNC lathe is an efficient and high-precision machine. The workpiece clampped can turning the outer circle, end face and inner hole at the same time.


Product Detail

Product Tags

Double-end CNC lathe

The double-end CNC lathe is an efficient and high-precision machine. The workpiece clampped can turning the outer circle, end face and inner hole at the same time. The production efficiency is higher than the traditional process, and the coaxiality and accuracy of the processed parts are better.
According to customer's request, loading and unloading auxiliary devices and automatic loading and unloading devices can be provided randomly.The clamping diameter ranges from φ5mm-φ250mm, and the processing length ranges from 140mm-3200mm..

sdawd

Opposite dual-spindle CNC lathe

The machine tool is mainly used for turning short shaft and small disk parts.
Through the automatic transfer between the two sequences of processing workpieces, the machine completes the processing of the inner hole, outer circle and both ends of the part respectively.
The machine can be equipped with manipulators, automatic loading and unloading and storage devices to complete the fully automated processing of parts.t is specially developed for the turning processing of short shaft and small plate parts.

ferwfef

Supporting Roller Machining Solution

Support roller is one of the important parts of "four wheels and one belt" in crawler bulldozers and hydraulic excavators.
There are 4 specifications of bulldozer rollers and 7 specifications of excavator roller, according to our existing models, we are divided into 3 categories:

uikyjt
egfaf
fwafasf

Support roller specification range and recommended machine

Roller outer diameter

(∮A)

Roller length

Machine Model

Max.

Clamping diameter

Headstock width

∮130

(About 2D)

SCK205S

∮175

175

∮139

Blank 136

∮163

Blank 137

∮188

Blank 185

∮250

280

∮212

Rough 234 (finished product 225)

∮250

248

∮340

Rough 286 (finished product 279)

To be developed

   

Schematic diagram of supporting roller is processed by the machine as follows

fwafsa

Machine Introduction
SCK205S double-end CNC lathe

fewfsfds

■The machine adopts 450 inclined bed layout, which has good rigidity and convenient chip removal.
■The spindle box integrates the three components of the spindle system, fixture and clamping cylinder, with compact structure and reliable work. The fixture is hydraulically clamped. The clamping diameter of the clamp is divided into two blocks.
■The clamp is of collet type. Adjusting claws are installed in the elastic chuck to replace the processing parts and change the clamping diameter. You only need to replace the adjusting claws, which is quick and convenient.
■Multiple boring tools are required according to the machined parts. To avoid interference of the tools, the turret is customized, and the rotating diameter of the cutter head is large. In order to make the turret more rigid, the center height of the turret is 125mm.
■The machine is equipped with a dual-channel control system, and the two tool rests can be linked with the spindle at the same time or separately to complete simultaneous or sequential processing of both ends of the part.
■In order to meet the different requirements of different customers, this machine tool can be equipped with left/right console for customers to choose.
■As for loading and unloading, currently it is manual loading and unloading. Considering the heavy weight of the supporting wheels, truss-type or joint-type automatic loading and unloading devices can be equipped, subject to negotiation with the buyer.

Specification

Item

Name

Unit

Specifications

Processing

range

Maximum turning diameter of bed

mm

Φ550

Φ600

Maximum rotating diameter of sliding body

Φ350

Maximum clamping diameter

Φ175

Φ250

Maximum processing length

Shaft1000;Tube:400

 

Spindle speed

r/min

1000

600

Headstock

Width of headstock

mm

175

280

Spindle clamping specifications

Φ130、139、166

Φ188、212、250

Spindle hole diameter

Φ175

Φ250

Height from spindle center to ground

1150

Feed

Travel

X1/X2

150/150

Z1/Z2

480/600

 

Working forward

X/Z

mm/r

0.001~6

Fast forward

X/Z

m/min

16

Tool post

Drive way

 

Slewing servo, locking hydraulic

Number of tools

Station

8

External knife square size

mm

□32×32

Diameter of boring bar

Φ50

Machine size (length×width×height )

mm

4920×1860(1910)×1900

Machine weight

Net weight

Kg

6700

Gross weight

7700


  • Previous:
  • Next:

  • Send your message to us:

    Write your message here and send it to us

    Send your message to us:

    Write your message here and send it to us