Renewable Design for Cnc Gantry Milling Machine - Manual Pipe Threading Lathe – Oturn

Introduction:

Send email to us

Product Detail

Feedback (2)

The organization keeps on the procedure concept "scientific management, high quality and efficiency primacy, purchaser supreme for Cnc Centre Lathe, Double Spindle Cnc Lathe, Cnc High Speed Flange Drilling Machine, How about to start your good organization with our corporation? We are all set, properly trained and fulfilled with pride. Let’s start our new business enterprise with new wave.

Renewable Design for Cnc Gantry Milling Machine - Manual Pipe Threading Lathe – Oturn Detail:

Machine Features

1. This conventional pipe threading lathe is a new design.
2. The bed is a unique three-layer wall structure, and the rear wall is arranged with a 12° slope. The guide rail width of the bed is 550mm. It is super-audio quenched and precision grounded to ensure the accuracy and service life of the machine.
3. The overall gear box type spindle unit, the headstock box is the overall casting structure, rather than the mat heightening block.
4. The application of quenching precision grinding gears and high-quality bearings ensures that the machine noise is good.
5. The main headstock adopts a strong external circulation cooling lubrication system, which not only reduces the temperature rise of the main shaft, but also effectively keeps the head box clean and lubricated.
6. The guide rail is attached with YT soft belt to improve the guiding precision and the precision of the machine tool, and effectively improve the service life of the machine tool.
7. The main drive gear is manufactured by Shenyang Machine Tool Group to ensure that the noise of the machine tool is good.
This machine tool is widely used in the processing of hydraulic cylinders, long shaft parts and various parts.

Specification

Item	Unit	QL1320	QL1323
Max.turning diameter of machine body	mm	630	630
Max.workpiece length	mm	1500	1500
Max.turning diameter of Tool holder	mm	350	350
width of Bed	mm	550	550
Spindle bore	mm	205	230
Three-jaw chuck	mm	205	230
Chuck specification		Φ500 Manual three-jaw chuck	Φ500 Manual three-jaw chuck
Spindle speed	r/min	18-450	18-450
Main motor power	kw	11	11
Machining thread	Metric thread	550	550
	1-15mm	205	230
21 Kinds	1-15mm	205	230
21 Kinds		Φ500 Manual three-jaw chuck	Φ500 Manual three-jaw chuck
	Inch thread	1-14tpi	18-450
26 Kinds	1-14tpi	11	11
26 Kinds	Metric thread
Maximum longitudinal travel of the saddle	mm	1250	1250
Spindle center to Tool installation datum	mm	32	32
Tool section size	mm	32×32	32×32
Tailstock sleeve diameter	mm	100	100
Tailstock sleeve travel	mm	250	250
Taper of tailstock taper hole	Mohs	5	5
Lateral displacement of tailstock	mm	±15	±15
Machine weight	Kg	4500	4500
Machine size	mm	3300x1450x1500	3300x1450x1500