PriceList for Machine For Valve - Turning Drilling And Tapping Combined Machine – Oturn

Introduction:

Send email to us

Product Detail

Feedback (2)

We also provide item sourcing and flight consolidation solutions. We have now our very own manufacturing facility and sourcing place of work. We could provide you with nearly every kind of merchandise associated to our merchandise variety for Shaft Turning Machine, Large Bore Cnc Lathe, Cnc Hobbing Machine, Welcome to visit our company and factory. Please feel free to get in touch with us if you need any further assistance.

PriceList for Machine For Valve - Turning Drilling And Tapping Combined Machine – Oturn Detail:

Machine Features

This machine is a multi-station turning, drilling and tapping combined machine . The left and right sides are composed of a boring turning head and a numerical control moving slide table, the feed is controlled by a numerical control system; the third side is composed of 1 boring turning head, 2 drilling heads, 1 flange drilling head, and 1 tapping head; The 5 heads on the third side can move horizontally with the CNC sliding table to exchange stations, and also can be fed separately for processing; the middle is composed of a hydraulic rotary table, a hydraulic fixture and other parts. It is also equipped with an independent electrical cabinet, hydraulic station, centralized lubrication device, full protection, water cooling system, automatic chip removal device and other components. The workpiece is manually loaded & unloaded and clamped hydraulically.

Specification

Power supply	380AC
Boring head Main motor power	5.5Kw
Feed motor	15N·m servo motor
Boring head Spindle speed range (r/min)	110/143/194 Spindle stepless speed regulation
Distance from spindle center to bed	385mm (specifically set according to the workpiece)
Taper hole at the end of the spindle	1:20
Drilling head main motor power	2.2Kw
Feed motor	15N·m servo motor
Taper hole at the spindle end	BT40
Porous drill bit Main motor power	2.2Kw
Feed motor	15N·m servo motor
Taper hole at the spindle end	BT40 (with multi-axis device)
Tapping head main motor power	3Kw
Feed motor	15N·m servo motor
Control system	Huadian CNC system
Protection form	Full protection
Maximum machining workpiece length	200mm
Maximum machining diameter	200mm
Flat rotating plate diameter	φ300mm (set according to the required tool travel
Z axis travel	350mm
X axis travel	110mm
Rapid traverse feed (mm/min)	X direction 3000 Z direction 3000
Repeat positioning accuracy	X direction 0.01 Z direction 0.015
Tooling form	hydraulic clamping
Lubrication method	Centralized lubrication by electronic lubrication pump