Massive Selection for Vtl Machine - Turning Drilling And Tapping Combined Machine – Oturn

Introduction:

Send email to us

Product Detail

Product Tags

Feedback (2)

Fast and superior quotations, informed advisers to help you choose the correct merchandise that suits all your requirements, a short generation time, responsible quality control and different services for paying and shipping affairs for Steel Bridge Drill Machine, Valve Production Line, Cnc Machine For Valve, We look forward to receiving your enquires soon and hope to have the chance to work together with you inside the future. Welcome to take a look at our organization.

Massive Selection for Vtl Machine - Turning Drilling And Tapping Combined Machine – Oturn Detail:

Machine Features

This machine is a multi-station turning, drilling and tapping combined machine . The left and right sides are composed of a boring turning head and a numerical control moving slide table, the feed is controlled by a numerical control system; the third side is composed of 1 boring turning head, 2 drilling heads, 1 flange drilling head, and 1 tapping head; The 5 heads on the third side can move horizontally with the CNC sliding table to exchange stations, and also can be fed separately for processing; the middle is composed of a hydraulic rotary table, a hydraulic fixture and other parts. It is also equipped with an independent electrical cabinet, hydraulic station, centralized lubrication device, full protection, water cooling system, automatic chip removal device and other components. The workpiece is manually loaded & unloaded and clamped hydraulically.

Specification

Power supply	380AC
Boring head Main motor power	5.5Kw
Feed motor	15N·m servo motor
Boring head Spindle speed range (r/min)	110/143/194 Spindle stepless speed regulation
Distance from spindle center to bed	385mm (specifically set according to the workpiece)
Taper hole at the end of the spindle	1:20
Drilling head main motor power	2.2Kw
Feed motor	15N·m servo motor
Taper hole at the spindle end	BT40
Porous drill bit Main motor power	2.2Kw
Feed motor	15N·m servo motor
Taper hole at the spindle end	BT40 (with multi-axis device)
Tapping head main motor power	3Kw
Feed motor	15N·m servo motor
Control system	Huadian CNC system
Protection form	Full protection
Maximum machining workpiece length	200mm
Maximum machining diameter	200mm
Flat rotating plate diameter	φ300mm (set according to the required tool travel
Z axis travel	350mm
X axis travel	110mm
Rapid traverse feed (mm/min)	X direction 3000 Z direction 3000
Repeat positioning accuracy	X direction 0.01 Z direction 0.015
Tooling form	hydraulic clamping
Lubrication method	Centralized lubrication by electronic lubrication pump