factory low price Drive Center Lathe - Turning Drilling And Tapping Combined Machine – Oturn

Introduction:

Send email to us

Product Detail

Product Tags

Feedback (2)

Sticking for the perception of "Creating products of top quality and producing friends with people today from all around the world", we constantly place the desire of shoppers to start with for Cnc Gantry Milling Machine, Machining Center Cnc, Large Vertical Cnc Drilling Machine, Therefore, we can meet different inquiries from different clients. Please find our website to check more information from our products.

factory low price Drive Center Lathe - Turning Drilling And Tapping Combined Machine – Oturn Detail:

Machine Features

This machine is a multi-station turning, drilling and tapping combined machine . The left and right sides are composed of a boring turning head and a numerical control moving slide table, the feed is controlled by a numerical control system; the third side is composed of 1 boring turning head, 2 drilling heads, 1 flange drilling head, and 1 tapping head; The 5 heads on the third side can move horizontally with the CNC sliding table to exchange stations, and also can be fed separately for processing; the middle is composed of a hydraulic rotary table, a hydraulic fixture and other parts. It is also equipped with an independent electrical cabinet, hydraulic station, centralized lubrication device, full protection, water cooling system, automatic chip removal device and other components. The workpiece is manually loaded & unloaded and clamped hydraulically.

Specification

Power supply	380AC
Boring head Main motor power	5.5Kw
Feed motor	15N·m servo motor
Boring head Spindle speed range (r/min)	110/143/194 Spindle stepless speed regulation
Distance from spindle center to bed	385mm (specifically set according to the workpiece)
Taper hole at the end of the spindle	1:20
Drilling head main motor power	2.2Kw
Feed motor	15N·m servo motor
Taper hole at the spindle end	BT40
Porous drill bit Main motor power	2.2Kw
Feed motor	15N·m servo motor
Taper hole at the spindle end	BT40 (with multi-axis device)
Tapping head main motor power	3Kw
Feed motor	15N·m servo motor
Control system	Huadian CNC system
Protection form	Full protection
Maximum machining workpiece length	200mm
Maximum machining diameter	200mm
Flat rotating plate diameter	φ300mm (set according to the required tool travel
Z axis travel	350mm
X axis travel	110mm
Rapid traverse feed (mm/min)	X direction 3000 Z direction 3000
Repeat positioning accuracy	X direction 0.01 Z direction 0.015
Tooling form	hydraulic clamping
Lubrication method	Centralized lubrication by electronic lubrication pump

Big Bore Pipe Lathe

Center Drive Cnc Lathe

Cnc Beam Milling Machine

Cnc Lathe Turning

Cnc Plate Drilling Machine

New Cnc Lathe Prices

Pipe Thread Cutting Lathe

Pipe Thread Turning Machine

Special Cnc Machine For Valve

Twin Spindle Lathe

The company's products very well, we have purchased and cooperated many times, fair price and assured quality, in short, this is a trustworthy company!