Factory Free sample Cnc Pipe Threading Lathe Machine - Turning And Milling For Butterfly Valve – Oturn
Factory Free sample Cnc Pipe Threading Lathe Machine - Turning And Milling For Butterfly Valve – Oturn Detail:
Machine Features
This machine is a turning and milling machining center. The left side is composed of a horizontal CNC moving slide table and a CNC brake head. The right side is a horizontal CNC moving slide table, a drill head (horizontal machining center) and a tool magazine. Cylinder composition. The middle is composed of hydraulic rotary table, fixtures and other parts, and is equipped with independent electrical cabinets, hydraulic stations, centralized lubrication devices, full protection, chip conveyors, and waterways. The workpiece is manually lifted and hydraulically clamped. See the mechanism schematic for details.
The bed body adopts the integral casting form, the bed rail is precisely ground, and the contact surface of the guide rail is carefully scraped to ensure the movement precision of the machine tool and ensure the stability of the equipment.
As shown in the figure, when machining the valve body, the operator positions the required workpiece on the tooling fixture and presses the workpiece. After adjusting the position of the workpiece, operate the CNC panel and the device runs. Both ends of the equipment are processed at the same time. One end performs processing steps such as an outer circle and an end surface. At the other end, drilling, boring, and internal step processing are performed. It is equipped with a tool magazine for automatic tool change. After the butterfly valve is processed at the current position, the rotary table rotates 180°. End face and outer circle are processed after boring, and the end which outer circle and the end surface is processed for boring.
The operation is simple, and the workpiece can be processed in a plurality of processes with only one positioning. And it has greatly reduced the labor force.
Specification
|
Description |
Specification |
|
Processing range |
DN50-DN300 |
|
Power supply |
380AC |
|
Main motor power |
11Kw(Spindle servo) |
|
Z-direction feed motor |
18N·m(Servo motor) |
|
Spindle speed range（r/min） |
110/140/190 stepless |
|
The distance from Spindle to worktable |
can be customized according to workpieces |
|
Spindle nose taper hole |
1:20/BT40 |
|
Max. processing diameter |
480mm |
|
Suitable for processing valve types |
Butterfly valve body |
|
Z-direction travel |
400mm |
|
X-direction travel |
180mm(Flat Rotary table) |
|
Repeat positioning accuracy |
Z direction:0.015/X direction :0.015 |
|
Tooling form |
Hydraulic compression |
|
Lubrication method |
Centralized lubrication of electronic lubricating pumps |
|
Processing position |
Flange end, inner hole, valve stem hole of Butterfly valve body |
|
Working accuracy |
The coaxiality between the inner hole of the upper flange and the lower flange of valve body is ≤0.2mm |
|
Tooling quantity |
Machine test run tooling-1pc |
|
Toolings |
OST/TAIWAN |
Specification
|
Description |
Specification |
|
Processing range |
DN50-DN300 |
|
Power supply |
380AC |
|
Main motor power |
11Kw(Spindle servo) |
|
Z-direction feed motor |
18N·m(Servo motor) |
|
Spindle speed range（r/min） |
110/140/190 stepless |
|
The distance from Spindle to worktable |
can be customized according to workpieces |
|
Spindle nose taper hole |
1:20/BT40 |
|
Max. processing diameter |
480mm |
|
Suitable for processing valve types |
Butterfly valve body |
|
Z-direction travel |
400mm |
|
X-direction travel |
180mm(Flat Rotary table) |
|
Repeat positioning accuracy |
Z direction:0.015/X direction :0.015 |
|
Tooling form |
Hydraulic compression |
|
Lubrication method |
Centralized lubrication of electronic lubricating pumps |
|
Processing position |
Flange end, inner hole, valve stem hole of Butterfly valve body |
|
Working accuracy |
The coaxiality between the inner hole of the upper flange and the lower flange of valve body is ≤0.2mm |
|
Tooling quantity |
Machine test run tooling-1pc |
|
Toolings |
OST/TAIWAN |
Product detail pictures:
Related Product Guide:
We have state-of-the-art equipment. Our products are exported for the USA, the UK and so on, enjoying a fantastic status among the clients for Factory Free sample Cnc Pipe Threading Lathe Machine - Turning And Milling For Butterfly Valve – Oturn , The product will supply to all over the world, such as: Sierra Leone, Mexico, El Salvador, We have developed large markets in many countries, such as Europe and the United States, Eastern Europe and Eastern Asia. Meanwhile with the powerful predominance in persons with ability, strict production management and business concept.we constantly carry on self-innovation, technological innovation, managing innovation and business concept innovation. To follow the world markets fashion, new products are kept on researching and providing to guarantee our competitive advantage in styles, quality, price and service.
By Aaron from Nairobi - 2017.09.16 13:44
Hope that the company could stick to the enterprise spirit of "Quality, Efficiency, Innovation and Integrity", it will be better and better in the future.
By Jo from Salt Lake City - 2018.09.29 13:24
