China Heavy Duty Conventional Lathes Factories - Gap Bed Manual Lathe Supplier – Oturn

Introduction:

Send email to us

Product Detail

Feedback (2)

Our solutions are broadly acknowledged and dependable by users and may meet consistently developing economic and social requires for Special Machine For Valve Machining, Heavy Duty Vertical Lathe, Vertical Milling Center, The main goal of our company would be to live a satisfactory memory to all of the shoppers, and establish a long term company romantic relationship with customers and users all around the entire world.

China Heavy Duty Conventional Lathes Factories - Gap Bed Manual Lathe Supplier – Oturn Detail:

Machine Features

1.This series lathe machine is suitable for internal and external turning , tapering , and other rotating faces, metric , module and inch threads , as well as drilling and pull oil slot .

2.Width of bed is wider than normal lathe machine , with high hardness on guideway , the guideway is through high-frequency quenching , wear-resisting .

3.This machine is easy to operate , with rapid device for carriage , design with single hand wheel to operate .

4.The strength and rigidity of machine is higher than normal lathe machine , high efficiency , suit for heavy duty machining .

Specification

Specification	Unit	CW6263	CW6280	CW62100	CW62120
Max.swing over bed	mm	630	800	1000	1200
Max.swing over gap	mm	830	1000	1200	1400
Max.swing over cross slide	mm	345	480	680	880
Distance between centers	mm	1000-12000
Bed width	mm	600
Spindle bore	mm	φ105(φ130)
Spindle taper	mm	Φ20 1:20 120mm (140mm)
Spindle speed	R/min	7.5-1000 5.5-730
Tool section	mm	32×32
Cross slide travel	mm	370
Compund rest travel	mm	200
Tailstock diameter	mm	Φ100 φ120
Tailstock taper		Mores 6
Motor	Kw	11/15

The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!