2021 Latest Design Cnc Turning Center Machine - Drilling And Tapping Compound Machine – Oturn

Introduction:

Send email to us

Product Detail

Feedback (2)

Gaining purchaser gratification is our company's aim eternally. We're going to make great initiatives to create new and top-quality products, satisfy your exclusive prerequisites and supply you with pre-sale, on-sale and after-sale solutions for Cnc Deep-Hole Drilling With Milling, Cnc Vertical Turning Lathe Machine, Valve Lathe, We are going to provide most effective quality, quite possibly the most current market aggressive rate, for each and every new and outdated consumers with the most great environmentally friendly solutions.

2021 Latest Design Cnc Turning Center Machine - Drilling And Tapping Compound Machine – Oturn Detail:

Main features

(1)This machine worked with Huadian PLC Controller, it can work for many procedures,for example, End face hole , Median orifice, Bore-hole and Sphere. It’s CNC Controller has good compatibility, powerful function and easy operation.
(2)The Feed Sliding table guideway use high quality gray cast iron,trough rough casting, tempering and aging treatment by three times. Fully eliminate the residual internal stress, The surface of the guide way adopts super audio quenching and the hardness is up to HRC55. Through high precision guide way grinding processing, to ensure the accuracy, rigidity, stability.
(3)The transmission part adopts precision ball screw and interpolation to eliminate the gap,to ensure the machine drive steady.
(4)The power head is equipped with three – stage manual speed change with powerful motor,achieve low speed but high torque, can withstand heavy cutting load, improve processing efficiency.
(5)The working equipment adopts Hydraulic pressure-automatic clamping, to improve efficiency and reduce labor intensity.
(6)The machine adopts Centralized lubrication, to ensure that the full lubrication of each moving parts then improve the service life of machine tools.

This machine is mainly used in processing Valve, Pump body, Auto parts, Construction machinery parts etc.It can work for many procedures,for example, End face hole , Median orifice, Bore-hole and Sphere.It worked with Huadian PLC Controller, It can realize automation, high precision, multi variety and mass production.

Main parameters:

Max.drilling diameter（mm)	6-12
Working table（mm)	360×400
Left/Right travel（mm)	480
Vertical travel（mm)	220
Drilling spindle speed	580
Travel（mm)	230
Taper hole of Spindle（NA)	7:24
Motor power（KW)	2.2
Tapping spindle speed（mm/min）	256
Horizontal Travel（mm)	300
Taper hole of spindle（NA）	7:24
Max.tapping（mm)	8-M14
Hydraulic station motor（KW)	1.5

The factory workers have rich industry knowledge and operational experience, we learned a lot in working with them,we are extremely grateful that we can encount a good company has excellent wokers.